Dear all i have HFC supported ( Planet TA ) card installed on Redhat 9 and i have installed bristuff and i can load zaptel and load zaphfc module in TE mode . and unable to load ztdummy module properly
i get this error in /var/log/asterisk/messages Dec 17 19:00:29 ERROR[604]: Unable to load config zapata.conf Dec 17 19:00:29 WARNING[604]: chan_zap.so: load_module failed, returning -1 Dec 17 19:00:30 WARNING[604]: Loading module chan_zap.so failed! this message on console Dec 18 11:51:28 ERROR[2103]: chan_zap.c:6318 mkintf: Unable to open channel 1: No such device or address here is my zaptel.conf loadzone=nz defaultzone=nz span=1,1,3,ccs,ami bchan=1-2 dchan=3 ################# here is my zapata.conf switchtype = euroisdn signalling = bri_net_ptmp ;this is for a peer to multipeer network ;pridialplan=local immediate=yes group = 1 context=default channel => 1-2 echocancel=yes i get this error when ztcfg -vv Zaptel Configuration ====================== SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1) Channel map: Channel 01: Individual Clear channel (Default) (Slaves: 01) Channel 02: Individual Clear channel (Default) (Slaves: 02) Channel 03: D-channel (Default) (Slaves: 03) 3 channels configured. ZT_CHANCONFIG failed on channel 1: Invalid argument (22) Did you forget that FXS interfaces are configured with FXO signalling and that FXO interfaces use FXS signalling? _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
