Re: [Asterisk-Users] Zaphfc/BRI Configuration help

Mon, 20 Dec 2004 02:03:37 -0800

Thanks lan
 
i have chnaged
signalling = bri_cpe_ptmp
 
also try changing pridialplan
 
but with no luck . ztcfg -vv shows 2 channels are ok but i get no debugg output related to Zap channel
 
i think problem may be in zaptel.conf
 
any ideas
 
 
 
---- Original Message -----
Sent: Monday, December 20, 2004 7:29 AM
Subject: [Asterisk-Users] Zaphfc/BRI Configuration help

i am having problem configuring Asterisk to Dial to pstn
i have installed bristuff for my hfc supported card and configured Zaptel and zapata.conf and Extension.conf and sip.conf according
 
sip clients can talk to each other but i cant make to pstn
 
BRI card configured in TE mode .
 
please comment whats wrong in it
 
################
here is zaptel.conf :
##################
loadzone=nz
defaultzone=nz
span=1,1,3,ccs,ami
bchan=1-2
dchan=3
 
here is zapata.conf
 
switchtype = euroisdn
signalling = bri_net_ptmp
pridialplan=local
echocancel=yes
immediate=yes
group = 1
 
 
 
 
I think that you have the signalling wrong.
My TE connection is set to
signalling = bri_cpe_ptmp
 
I also had to try several settings for pridialplan before I could make both local and national calls.
 
Cheers
 
Ian

_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to