I went into the phone and made sure that 'User ID is phone number' was set to 'No' and made sure that Fromuser=ext# was not present in the sip.conf file. When a call comes in, the log shows the incoming number but the phone still reads the extension number. I also have the sip.conf dtmfmode=inband and the SIP phone set to in-audio. Maybe this is a problem with the firmware version (1.0.5.16) or my phone is broken.
-Dave -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Goutam Shaw Sent: Monday, December 20, 2004 2:11 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] Grandstream and CallerID We recently went through this pain. Here is the resolution. On the phone set the following field to "no" User ID is phone number On the PBX delete the following field in "sip.conf" for each extension associated with a GS BT101 phone Fromuser=ext# Regards, Goutam -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of David Ishmael Sent: December 20, 2004 3:25 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [Asterisk-Users] Grandstream and CallerID Jon, I went in and setup my extensions.conf just like you stated, and I can see in the incoming call number in the log file but the phone does not display the number (it's just showing the phone's extension number). Can you post your sip.conf context for the GS so I can compare? -Dave -----Original Message----- From: Jon Lawrence [mailto:[EMAIL PROTECTED] Sent: Monday, December 20, 2004 9:41 AM To: [EMAIL PROTECTED]; Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Grandstream and CallerID On Monday 20 December 2004 14:59, David Ishmael wrote: > I'm having similar problems with my Grandstream BT-100 SIP phone. I've > removed the fromuser=1234 from the sip.conf file but the phone still shows > 1234 in the display when getting a call. I can see the incoming PSTN CID > in the log file but for some reason its not passing this to the phone. The > CID looks something like: > > "Joe Somebody" <7035551212> > > Others have stated that the BT-100 can't take characters, only numbers so I > would assume there's a function like SetCIDNum(${CALLERID}) to extract the > number and send it to the BT-100. Can anyone that has the CallerID working > post their setup/configs so I can see what I'm doing wrong? > I've used SetCallerID(${CALLERIDNUM}) with /gS phones and they display CID correctly. ie: exten => 2000,1,SetCallerID(${CALLERIDNUM}) exten => 2000,2,Dial(SIP/2000,30,Tt) Jon _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
