Hi I updated on the phones here and at least it now logs on, use to only work with SIP, but very quickly the host becomes unreachable. I managed to place one call and the (Transf, HOLD & Flash keys) didn't work either.
Nic On Tue, 21 Dec 2004 08:55:06 +1000, Gary <[EMAIL PROTECTED]> wrote: > On Mon, 20 Dec 2004 10:09:48 -0500, Kanuri, Seshu (Company IT) wrote: > > > > > > >/Snip/ > >For those of you who may be interest.... > > > >IAX2 loads are now available for the standard builds... > > > >http://www.aredfox.com/edownloadsiax2.htm > > > >Just a word of caution... > > > >Remember to change the ports over to 4569 from whatever. > > > >And don't forget to grab the palmtool from > > > >http://www.aredfox.com/download/tools/PalmTool.zip > > > >My own testing of IAX2 with both a phone and an ATA is that IAX2 is > >working very well :-) > > > >Gary > > > >/Snip/ > > > >Gary, > > > >On the Centrality site there are several Zip files to download. > >What are these different versions represent? > >What does the Suffix F and B and T represent? > > > >PA168X Products IAX2 Program Download > > > >File Name Content Format Size Update > >PA168F.zip PA168F VER 1.40 BIN 152K 2004/12/20 > >PA168FB.zip PA168FB VER 1.40 BIN 150K 2004/12/20 > >PA168FS.zip PA168FS VER 1.40 BIN 150K 2004/12/20 > >PA168T.zip PA168T VER 1.40 BIN 150K 2004/12/20 > >IP8008.zip IP8008 VER 1.40 BIN 150K 2004/12/20 > >PingHe.zip WuChuan VER1.40 BIN 150K 2004/12/20 > >5111PHONE.zip WuChuan VER1.40 BIN 386K 2004/12/20 > >PA168P.zip PA168P VER1.40 BIN 386K 2004/12/20 > >PA168Q.zip PA168Q VER1.40 BIN 386K 2004/12/20 > >PA168S.zip PA168S VER1.40 BIN 386K 2004/12/20 > > > >Seshu Kanuri > > The different versions are for the different versions of PA1688 > phones/ata's. > > In my Case, the ip PHONE is identified by its label... > > Type HOP-1002 Rev 004 << the rev is important) > Hirakawa Electronics Co Ltd > > Their home page is www.5111soft.com > > As its a Rev 004 its actually a PingHE load. > if it was a Rev 008 its a 5111Phone load. > > I use their ATA unit as well its an AG-168 > > Looking at their home page (which in typical chinese fashion is in > Chinglish, but note the download names... > > The AG-168 uses a PA168Q load. > > You must research your hardware !! > > Just a tip for those playing with their phones ata/'s for the first > time... > > You have a good chance of screwingup your loading, particularly with > a wrong version.. I personally recommend playing with phones over ata's > at first.... recovery technique ... > > remember what the factory default base addess is, in majority of cases > its 192.168.1.100 but depending upon manufacturer & model it might > be different. > > Hold the * key down whilst turning on phone, You must do this twice > (turn on's in succession). Presto, you are back at default. > > Have fun, > > Gary > . > > > _______________________________________________ > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
