> -----Original Message----- > From: [EMAIL PROTECTED] [mailto:asterisk-users- > [EMAIL PROTECTED] On Behalf Of John Hill > Sent: Tuesday, December 21, 2004 8:40 AM > To: [email protected] > Subject: [Asterisk-Users] upgraded source now ata's ring but stop silence > oninbound calls > > I was doing a daily make update for asterisk. On the 19th the new version > compiled fine. I installed it. All of my ata 186's can call out to pstn > etc. > All inbound calls, the phones ring but when you pickup, just silence both > local and remote with no complaints in the cli. I backed down to the r 1.0 > 1.0.3 on the 20th CVS-v1-0-12/20/04-18:24:52 it worked ok. > > Yesterday I did a cvs update on the 1.0 source code, recompiled and now it > does the same thing as the dev source. Calls go out no problem but inbound > rings but are dead upon answer. I had to return to the > CVS-v1-0-12/20/04-18:24:52 code to get it to work again. > > Have I missed a configuration change somewhere? > > Thanks > John Hill >
I had canreinvite=yes in sip.conf I changed it to no. Still the same new stable source has no audio on inbound calls. Stable source from the 20th works? --John Hill _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
