-----Original Message----- I'm crazy here trying to make X-Pro use ONLY g729, and you're struggling to make it not to use it :)... Can you please indicate what's your config for X-Pro and sip.conf? sip.conf: [12345] type=user username=12345 secret=12345 nat=no host=dynamic reinvite=no canreinvite=no disallow=all allow=g729 allow=g729a allow=g723.1 allow=g726 allow=ulaw allow=alaw context=sip_default
And this is the message that asterisk shows when I try to dial from X-Pro: *CLI> Dec 21 18:02:49 WARNING[2375]: chan_sip.c:2764 process_sdp: No compatible codecs! Dec 21 18:02:50 NOTICE[2375]: chan_sip.c:7295 handle_request: Unable to create/find channel As soon as I enable GSM or ulaw everything goes fine... I have the license for g729 installed. This is the output of "show g729" in the * console: 0/0 encoders/decoders of 1 licensed channels are currently in use Any ideas? Thanks in advance, RODOLFO /SNIP/ >From your SIP.CONF... allow=g729 - Keep this. This is enough allow=g729a - remove this line Also if you are using Xpro from your PC, which is connected to a router and not having a fixed IP address, you may like to keep NAT as... nat=yes --Seshu -------------------------------------------------------- NOTICE: If received in error, please destroy and notify sender. Sender does not waive confidentiality or privilege, and use is prohibited. _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
