Hi list,
Just installed spandsp. In my limiting testing, I have an issue on a Philips fax machine (HFC21) directly connected to my * server through TDM400, reception with rxfax works fine, but txfax always fails. Below is a transcript of failed transmit.
This is with asterisk-1.0.3 (with native moh patch but I don't think it is the source of the problem). I already tried libtiff 3.5.7, 3.6.0, 3.6.1 (with hylafax patch), with same results. Echo cancel is off on the zap channel, though I don"t think this is still needed. I have read the wiki, scott's faxing with asterisk, the mailing list, found nothing on bug tracker.
On a test to a Sagem fax (through the PSTN via TDM400 on my side) txfax worked flawlessly, so this is obviously related to the Philips fax, but maybe there is something in the logs below that shows the source of the problem, and a help fix it. I'm available for more testing.
Thanks, Jean-Denis Girard
-- Starting simple switch on 'Zap/1-1' Urgent handler Dec 17 11:22:32 DEBUG[3600]: chan_zap.c:4031 zt_read: DTMF digit: 9 on Zap/1-1 Dec 17 11:22:32 DEBUG[3600]: chan_zap.c:4031 zt_read: DTMF digit: 7 on Zap/1-1 Dec 17 11:22:32 DEBUG[3600]: chan_zap.c:1221 zt_enable_ec: No echocancellation requested Dec 17 11:22:32 DEBUG[3600]: pbx.c:1261 pbx_extension_helper: Launching 'Answer' -- Executing Answer("Zap/1-1", "") in new stack Dec 17 11:22:32 DEBUG[3600]: chan_zap.c:2288 zt_answer: Took Zap/1-1 off hook Dec 17 11:22:32 DEBUG[3600]: pbx.c:1261 pbx_extension_helper: Launching 'BackGround' -- Executing BackGround("Zap/1-1", "Sysnux/bonjour1") in new stack Dec 17 11:22:32 DEBUG[3600]: channel.c:1710 ast_set_write_format: Set channel Zap/1-1 to write format slin Dec 17 11:22:32 DEBUG[3600]: channel.c:1131 ast_settimeout: Scheduling timer at 160 sample intervals -- Playing 'Sysnux/bonjour1' (language 'fr') Urgent handler Dec 17 11:22:40 DEBUG[3600]: channel.c:1131 ast_settimeout: Scheduling timer at 97 sample intervals Dec 17 11:22:40 DEBUG[3600]: channel.c:1131 ast_settimeout: Scheduling timer at 0 sample intervals Dec 17 11:22:40 DEBUG[3600]: channel.c:1131 ast_settimeout: Scheduling timer at 0 sample intervals Dec 17 11:22:40 DEBUG[3600]: channel.c:1710 ast_set_write_format: Set channel Zap/1-1 to write format ulaw Dec 17 11:22:40 DEBUG[3600]: pbx.c:1261 pbx_extension_helper: Launching 'TxFAX' -- Executing TxFAX("Zap/1-1", "") in new stack Dec 17 11:22:40 DEBUG[3600]: channel.c:1743 ast_set_read_format: Set channel Zap/1-1 to read format slin Dec 17 11:22:40 DEBUG[3600]: channel.c:1710 ast_set_write_format: Set channel Zap/1-1 to write format slin Changed from phase 0 to 1 Slow carrier up Slow carrier down Slow carrier up Slow carrier down Slow carrier up Slow carrier down Urgent handler Slow carrier up Slow carrier down Slow carrier up Changed from phase 1 to 4 Sending ident
CSI: 40 37 32 35 33 38 34 20 39 38 36 2b 20 20 20 20 20 20 20 20 20
DIS: Prefer 256 octet blocks Supported data signalling rates: V.27ter and V.29 R8x7.7lines/mm and/or 200x200pels/25.4mm 2D coding Scan line length: 215mm Recording length: Unlimited Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85 R8x15.4lines/mm Minimum scan line time for higher resolutions: T15.4 = T7.7 North American Letter (215.9mm x 279.4mm) North American Legal (215.9mm x 355.6mm)
DIS: 80 00 cc f4 80 80 81 80 80 80 18
HDLC underflow in state 9 Changed from phase 4 to 3 Slow carrier up Slow carrier down Slow carrier up <<< NSF: 20 50 80 00 da 00 00 02 00 60 00 00 00 00 00 00 00 00 00 00 00 NSF without final frame tag <<< CSI: 40 37 32 35 33 38 34 20 20 20 20 20 20 20 20 20 20 20 20 20 20 CSI without final frame tag Remote fax gave CSI as: "483527" T4 timeout in state 9 Changed from phase 3 to 4 Sending ident
CSI: 40 37 32 35 33 38 34 20 39 38 36 2b 20 20 20 20 20 20 20 20 20
DIS: Prefer 256 octet blocks Supported data signalling rates: V.27ter and V.29 R8x7.7lines/mm and/or 200x200pels/25.4mm 2D coding Scan line length: 215mm Recording length: Unlimited Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85 R8x15.4lines/mm Minimum scan line time for higher resolutions: T15.4 = T7.7 North American Letter (215.9mm x 279.4mm) North American Legal (215.9mm x 355.6mm)
DIS: 80 00 cc f4 80 80 81 80 80 80 18
HDLC underflow in state 9
Changed from phase 4 to 3
Slow carrier up
Slow carrier down
Slow carrier up
<<< XCN: fa
XCN with final frame tag
In state 9
Disconnecting
Changed from phase 3 to 7
-- Setting global variable 'REMOTESTATIONID' to '483527'
Changed from phase 7 to 8
Urgent handler
Dec 17 11:22:52 DEBUG[3600]: channel.c:1743 ast_set_read_format: Set
channel Zap/1-1 to read format ulaw
Dec 17 11:22:52 DEBUG[3600]: channel.c:1710 ast_set_write_format: Set
channel Zap/1-1 to write format ulaw
Dec 17 11:22:59 DEBUG[3600]: chan_zap.c:3764 __zt_exception: Exception
on 19, channel 1
Dec 17 11:22:59 DEBUG[3600]: chan_zap.c:3076 zt_handle_event: Got event
On hook(1) on channel 1 (index 0)
Dec 17 11:22:59 DEBUG[3600]: channel.c:742 ast_hangup: Hanging up
channel 'Zap/1-1'
Dec 17 11:22:59 DEBUG[3600]: chan_zap.c:1947 zt_hangup: zt_hangup(Zap/1-1)
Dec 17 11:22:59 DEBUG[3600]: chan_zap.c:1975 zt_hangup: Hangup: channel:
1 index = 0, normal = 19, callwait = -1, thirdcall = -1
Dec 17 11:22:59 DEBUG[3600]: chan_zap.c:2377 zt_setoption: Set option
TDD MODE, value: OFF(0) on Zap/1-1
Dec 17 11:22:59 DEBUG[3600]: chan_zap.c:1193 update_conf: Updated
conferencing on 1, with 0 conference users
-- Hungup 'Zap/1-1'
Urgent handler
Urgent handler
Dec 17 11:23:00 DEBUG[3600]: chan_zap.c:5932 do_monitor: Monitor
doohicky got event Hook Transition Complete on channel 1_______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
