Even though they make the cards and advertise that they support data modes, digium won't support data mode on the $500 card they sold to me, so I must turn to the list.
Has anyone configured a T100P to use a T1 strictly as bandwidth? Is there a HOWTO somewhere? Wiki has nothing I could find. I've got plently of public IPs I can assign to it but don't know how. Thanks, Matthew ----- Original Message ----- From: "Matthew A. Nicholson via RT" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, December 23, 2004 10:38 AM Subject: [digium.com #12961] T100P as bandwidth > Yes the hardware, and our drivers suppport both voice and data modes, > but because of the nature of the configuration we do not support it. > Configuring one of our T1 cards for data mode often requires a kernel > recompile, and extensive network device configuration. Here at Digium > our speciality is telephony not networking, this is why we do not > support the data mode of our hardware. > > > [EMAIL PROTECTED] - Wed Dec 22 17:16:29 2004]: > > > > I dont mean to sound like a jerk but it says quite clearly on your website > > (http://www.digium.com/index.php?menu=wildcard_t100p) that this card does > > both Voice and Data. Why would you guys tell me that the card supports > data > > but not support data config yourself? They are your cards right? > > > > Thanks, > > Matthew > > > > -- > Matthew A. Nicholson > Digium _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
