Hi
Mary Christmas to y'all !
I am trying to configure * with one TDM and one ISDN and Bri-stuff, all is ok with only TDM but when add ISDN I get following error:
I have tried to switch fxs/fxo but then I get error also without ISDN, card is configured from Digium with FXS(green) modules are closest to the bracket.
ZT_CHANCONFIG failed on channel 1: Invalid argument (22) Did you forget that FXS interfaces are configured with FXO signalling and that FXO interfaces use FXS signalling?
loadzone=no defaultzone=no
fxoks=1-2 # Make sure that the FXS(green) modules are closest to the bracket
fxsks=3-4 # This is for the FXO module(s) because it uses FXS
span=2,1,3,ccs,ami bchan=5-6 # Old value: 1-2
dchan=7 # Old value: 3
Thank you ! HB Norway _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
