Do a make config in /usr/src/zaptel this will take care of the init.d script.
On Tue, 28 Dec 2004 04:48:50 -0500, Jeff <[EMAIL PROTECTED]> wrote: > Thanks for the response but it turned out to be two tiered... > > I had to run ztcfg manually because it was not run in the init script. > > I was able to get it to work on another motherboard. (using the technique > above) > > After two days a fiddling, compiling, etc I started dreaming about these > files ;-) > > Great product! > > Jeff > ----- Original Message ----- > From: "C F" <[EMAIL PROTECTED]> > To: "Asterisk Users Mailing List - Non-Commercial Discussion" > <[email protected]> > Sent: Monday, December 27, 2004 11:44 PM > Subject: Re: [Asterisk-Users] FC3, TDM11B (DEVPCI) and asterisk > > > Yes I do. Post the zapata.conf, zaptel.conf and the extensions.conf, > > i'll see what I can do. > > > > > > On Fri, 24 Dec 2004 18:49:27 -0500, Jeff <[EMAIL PROTECTED]> wrote: > > > Hey folks; > > > > > > I am a old Dialogic telephony hack and have tried asterisk a while back > on > > > a laptop with the OSS module and I liked what I saw. I recently came > across > > > some info regarding asterisk 1.0 and thought I should give it a go. I > used a > > > AMD K7 MB, compiled the binaries without a real problem and realized > that I > > > might have a sound card issue because I couldn't hear the messages but > the > > > demo worked otherwise. I noticed that my sound card was having a problem > so > > > I abandoned that approach but I'm not finished just yet. > > > > > > I then decided to get a DEV kit and give it a real go. I compiled the > > > binaries (zaptel and asterisk) without incident and I was able to start > the > > > drivers. I have green lights on port 1 and 4 and I understand that port > 1 is > > > the station port (for a 2500 set regular phone set?) and that port 4 is > able > > > to connect to a regular 1FL (simple pots line). > > > > > > I used some 'examples' from the Digium site and when that didn't work I > used > > > a few from a link I found > > > (http://iheavy.com/modules.php?op=modload&name=News&file=article&sid=35) > but > > > I have no dialtone on the phone and it won't pickup (or write ANY logs) > when > > > I call the line. > > > > > > My question(s) for the list is/are; > > > > > > Does anyone have a working asterisk system using zaptel TDM cards on FC3 > > > with kernel 2.6.9-1.681_FC3 and if so, is there something that I am > > > missing? > > > > > > Any tips would be appreciated and thanx in advance. > > > > > > Jeff > > > > > > _______________________________________________ > > > Asterisk-Users mailing list > > > [email protected] > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > To UNSUBSCRIBE or update options visit: > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > _______________________________________________ > > Asterisk-Users mailing list > > [email protected] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > _______________________________________________ > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
