Kristian Kielhofner wrote:
Steven P. Donegan wrote:
I have a Sipura 3000, apparently configured correctly, when incoming calls arrive on the telco port they arrive properly on the Asterisk system - however they don't get routed properly. The Asterisk message:
Dec 30 07:47:16 NOTICE[2745]: chan_sip.c:7486 handle_request: Failed to authenticate user WIRELESS CALLER <sip:[EMAIL PROTECTED]>;tag=7f8072c0c46250f7o1
X's are there to not advertise my phone number :-)
Any idea as to why any kind of authenticate would be done or would fail would be appreciated.
Steven,
It really seems like you need to setup an entry in sip.conf that "PSTN Line" on the sipura can register with. Do you have an entry in sip.conf for it? How is "PSTN Line" programmed?
-- Kristian Kielhofner _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Here is sip show peers:
www*CLI> sip show peers
Name/username Host Dyn Nat ACL Mask Port Status 1004/1004 1.0.24.223 D 255.255.255.255 5060 Unmonitored
1003/1003 1.0.24.223 D 255.255.255.255 5060 Unmonitored
1002/1002 1.0.24.222 D 255.255.255.255 5061 Unmonitored
1001/1001 1.0.24.222 D 255.255.255.255 5060 Unmonitored
1000/1000 (Unspecified) D 255.255.255.255 0 Unmonitored
5 sip peers loaded [4 online , 1 offline]
Which seems to say the Sipura is registered...
..snip..
Steven,
You need to create another "friend" for the Sipura FXO. You then need to configure "PSTN Line" to register as that user. You need to make sure that context= for your new friend allows the Sipura to forward those PSTN calls to where they need to go.
Think of it like this - on a Sipura 2000, you have lines 1 + 2. On a Sipura 3000 your have lines 1 + 2 - it just so happens that they call line 2 "PSTN Line". It still needs valid login information to get to *.
Example (1003 is the Sipura 3000 Line 1 user):
[1003] type=friend username=1003 secret=1003 canreinvite=no host=dynamic dtmfmode=rfc2833 mailbox=1003 nat=no disallow=all allow=ulaw
[1003-in] <--- can be anything, so long as you know what it is type=friend username=1003-in secret=1003-in canreinvite=no host=dynamic context=friends <---- set to whatever you need it to be dtmfmode=rfc2833 nat=no disallow=all allow=ulaw
Then, configure "PSTN Line" on the 3000 to register with your * machine as 1003-in. Hopefully this helps.
-- Kristian Kielhofner _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
