On Thu, 30 Dec 2004, Lyle Giese wrote:
Is your X100P set for loop start or Kewl Start? I am betting loop start, try changing to ks instead.
Lyle
This is what I have in /etc/asterisk/zapata.conf so it should be Kewl Start.
It might be that your local telco does not supply disconnect supervision.
Try adding:
busydetect=yes busycount=6
And if you're lucky Asterisk will "guesstimate" hangup based on that busy signal you hear when the line is disconnected by the other hand (it takes about 10 seconds with bustcount=6).
A word of warning: turning this might cause random disconnect in the middle of calls, so test test test.
Gilad
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
