On January 3, 2005 08:01 am, Bob Goddard wrote: > > As I said, I measured the variation on the relevant lines with a 100MHz > > DSO when running under load.
> No you didn't. What was the power load when the modules failed? The actual current draw I did not measure -- I was looking for voltage sags or swells on the +5V and +12V lines during load. > That is a simple "find", a better one would be "find / -ls", you should > also try running seti on all processors at the same time. yes it's a simple find but there would be significant disk/cache thrashing when combined with a kernel complile, as I'd mentioned. > If your motherboard requires 5amps when your psu can only supply 4, then > you're going to have trouble. Yes I completely agree with you here. > This IS a problem, just that it may not be in your case. I am willing to bet that my case is the more general case here -- The TDM current draw just is not a big draw, or at least it should not be -- certainly no more than a HDD during heavy seeking or a video card during some intense gaming sequences or even some of the larger data acquisition/DSP cards I've used in the past. -A. _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
