Stefan Sowa wrote:
Hi there,
i'm running asterisk with one HFC Card(zaphfc) for NT-Mode and one Fritz
PCI in TE-Mode with the chan_capi driver, connected to mISDN.
The Fritzcard is directly connected to the external ISDN line of the
german telekom. My Telephone is connected to the HFC-Card in NT-Mode.
How can i get the dialtone from the ISDN provider(telekom). I wan't to
dial 0 an get out of the PBX directly, like in other Hardware PBXs. I
don't want to simulate a dialtone with asterisk.
At the moment i have a setup LIKE this(just typed in for this mail and
not tested).
exten => s,1,Wait,1
exten => s,2,Answer
exten => s,3,Playtones(dial);
exten => s,4,DigitTimeout,5
exten => s,5,ResponseTimeout,10
exten => _0XXX.,1,StripMSD,1
exten => _XXX.,2,Dial,CAPI/3231:bBYEXTENSION
With a Zaptel channel (TDM) it would simply be:
exten => 0,1,Dial(Zap/1)
Maybe the same will work with ISDN:
exten => 0,1,Dial(CAPI/3232)
?
Gilad
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
