Rich Adamson wrote:
Is it normal for the following to occur hourly on an E1 PRI ?
-- B-channel 0/1 successfully restarted on span 1
-- B-channel 0/2 successfully restarted on span 1
-- B-channel 0/3 successfully restarted on span 1
-- B-channel 0/4 successfully restarted on span 1
-- B-channel 0/5 successfully restarted on span 1
-- B-channel 0/6 successfully restarted on span 1
-- B-channel 0/7 successfully restarted on span 1
-- B-channel 0/8 successfully restarted on span 1
-- B-channel 0/9 successfully restarted on span 1
-- B-channel 0/10 successfully restarted on span 1
Yes, that is normal. However, if any calls are in progress when this happens, the calls are not dropped or impacted.
Not sure why the restart code was added, but it was some time ago (maybe up to a year ago). I'd have to guess that it was added to address an issue back then and probably really isn't needed any more (but that is a 'guess').
_______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
.
In extremely loaded PRI systems, asterisk suffers from the occasional "stuck" channel, usually following a bunch of frame re-tries. This restart code usually is able to clear the channel, allowing it to accept new incoming calls, so it's been a great thing to have!
Regards Scott Stingel
_www.evtmedia.com
_
_______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
