I really am at my wits end about this one. Some people report this card and server working fine while others (like myself) can't get it going no matter what. I have been told by the Digium distributor in our country that this card simply "not compatible with some motherboards". Sounds very weak for such an expemsive card....
On Tue, 04 Jan 2005 17:15:54 +1100, Adam Goryachev <[EMAIL PROTECTED]> wrote: > Just wondering, has anyone tried asking HP/Compaq about this problem? > Since it *ONLY* shows up on their servers, and only on specific models, > perhaps they cut one corner too many? > > Regards, > Adam > > On Tue, 2005-01-04 at 17:05 +1100, Eric Bishop wrote: > > And I thought it was just me going crazy. I have the exact same issue > > on a HP-Compaq DL360 G4 server (1U rackmount version). I have tried > > everything that has been mentioned here and more. Even replaced the > > TE410P card (so know it's not the card). I have tried with FC2, FC3 > > and RHEL 3. Have tried kernel 2.4.X and 2.6.X. Have tried vanilla > > kernels and stock fedora kernels. Have tried every known BIOS tweak. I > > have tried a different card in the slot (firewire card) and that does > > show interrupts, but no matter what I do I can't get the TE410P to > > show any interrupts. Loading the zaptel driver appears to work but the > > lights on the TE410P just go off (rather than the normal blinking). My > > /proc/interrupts always looks as follows: > > > > If anyone has the solution to this I owe you big! > > > > > > > On Tue, 4 Jan 2005 09:36:47 +1000, Joshua McAdam <[EMAIL PROTECTED]> wrote: > > > > > > I'm also having the same problem at the moment with a DL380 G4 SMP, > > > > > > I've tried Redhat 8.0, with smp and non smp stock 2.4 kernels and also a > > > vanilla 2.4.22, SuSe 9.0 with smp and non smp stock 2.4 kernels. > > > > > > I've also tried SuSe 9.1 x86-64 (with 2.6 SMP & Non SMP) with no success. > > > > > > I've tried with hyperthreading on and off, I/O Prefetch etc on and off > > > within the BIOS - pretty much anything I thought could make a > > > difference... > > > > > > I've also tried the card in all 3 PCI slots in the above configurations... > > > > > > Anyone got any other ideas? > > _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
