Hey Everyone,
I recently purchased a few IAXy units for some testing, and have come across a some problems.
One of them can be provisioned but will not ring the connected telephone. It also does not provide a dial tone when you pick up the phone. When a call is made to the IAXy one of the green lights on the board goes from a solid on state, to a flashing state that coincides with the ringing that is heard on the telephone you are placing the call from.
I have mentioned this to Digium who said they would replace it, and have been waiting for over a week for them to issue an RMA for it (as I think this would mean that the FXS is faulty).
The other one that is giving me problems has a different setup. It is being used from an outside network in another state (I'm in PA they are in VA), it registers with the * server, and I can call it. The telephone connected will ring, but when the user picks up they cannot hear me but I can hear them perfectly. If the user tries to call out via the IAXy, they don't get a dial tone... all they get is static. If they dial an extension (say to call me) the extension called will ring, but again I can hear them but they cannot hear me. This is also true if they call or are called from another IAXy, which (I think...) is working correctly. I have read that the static may be a power supply issue, although the current power supplies were provided by Digium. Also have read that the one-way voice could be related to trunking, but both the IAXy and the * server are set to no. And a third IAXy has been working with the same iax.conf settings (except for a different extension).
To put another fun spin on this... I have been able to connect to the same iax.conf settings using Firefly soft phones without any problems, but would like to be independent of a computer whenever possible. I'm not sure if I have missed anything... port 4569 is opened on both the router connected to the * server, as well as the router the IAXy is connected to. I have also opened DMZ's on both sides, as well as tried without opening any of the ports or DMZ's.... I'm stuck.
Anyone with any thoughts.... I would really appreciate any help. _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
