You can configure the gain to be lower on the SPA2000 via the web interface - Ido not remember the exact location, but you will find it under advanced settings.
--- CClarke <[EMAIL PROTECTED]> wrote: > Dear All ~ > > I have * setup & running ok (with two Wildcard > X100P's to PSTN). I also have > two analog phones connected into same through a > SIPURA 2000. These work fine, > except that when I call out through PSTN & try to > send DTMF tones to (say) a > remote PBX to dial an extension, the gain seems to > go wild (high), and the > DTMF tones are not recognized at the other end. > > I tried setting the SIP2000 to use inband dtmfmode > (as opposed to auto), and > likewise in sip.conf, but no success. > > btw, I've also set relaxdtmf=yes in zapata.conf > since inbound calls sometimes > seem to have trouble dialling extensions. > > A soft IAX phone (e.g. DIAXPhone) works ok, so I > suspect my SIP2000/sip.conf > setup, but can't see what I'm doing wrong. > > Christina. > _______________________________________________ > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > __________________________________ Do you Yahoo!? Yahoo! Mail - Find what you need with new enhanced search. http://info.mail.yahoo.com/mail_250 _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
