Another thing I highly recommend is to turn off all devices that are not needed in your bios. For example, on board sound, USB ports, Serial Ports, LPT port and so on. Doing this will free up IRQ's and you will have less of a chance that the IRQ will be shared with something else.
Todd
--
Start Your Own ISP!
http://www.YourOwnISP.com
----- Original Message ----- From: "Kristian Kielhofner" <[EMAIL PROTECTED]>
To: "Asterisk Users Mailing List - Non-Commercial Discussion" <[email protected]>
Sent: Thursday, January 06, 2005 12:26 AM
Subject: Re: [Asterisk-Users] modprobe: Can't locate module wctdm
Ronald Wiplinger wrote:Me wrote:
10- Ran cat /proc/interrupts to make sure my card was not sharing an interrupt with with any other hardware
Can you interprete it for my situation ?
CPU0 CPU1 0: 1469462555 1466917080 IO-APIC-edge timer
1: 153130 186604 IO-APIC-edge keyboard
2: 0 0 XT-PIC cascade
8: 2 0 IO-APIC-edge rtc
9: 0 0 IO-APIC-level acpi
12: 35521 0 IO-APIC-edge PS/2 Mouse
14: 9838632 7431613 IO-APIC-edge ide0
16: 14 0 IO-APIC-level eth1, usb-uhci, usb-uhci
17: 16 0 IO-APIC-level eth2, ohci1394
18: 1714185828 1225735285 IO-APIC-level eth3, usb-uhci, wctdm
19: 22648117 12403171 IO-APIC-level eth0, usb-uhci
23: 0 0 IO-APIC-level ehci_hcd
NMI: 0 0 LOC: 2936506117 2936506698 ERR: 0
MIS: 0
wctdm is sharing IRQ 18 with eth3, and your USB controller. That's a bad thing!
--
Kristian Kielhofner
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
