Try echotraining=800 in zapata.conf ------------------------ From: Ian Chilton <[EMAIL PROTECTED]> Subject: [Asterisk-Users] Echo on Zaptel FXO :( Date: Sat, 8 Jan 2005 22:02:43 +0000 To: [email protected]
> Hi All, > > I've got an MD3200 modem which is working as a Zaptel FXO interface for > Asterisk (X100P clone I believe). It seems to work, but on incoming or > outgoing calls I can hear the other party ok but when I speak, I hear > my voice echo back at me (quite quietly but it's distracting!) on > everything I say. The other party doesn't seem to hear the echo - they > just say I sound a bit quiet. > > Someone suggested I play with the rxgain and txgain but this didn't seem > to help. Is there anything I can do? - or is it a problem with my fxo > card or zaptel cards in general? > > I'm running Asterisk 1.0.2-2 on Debain Linux (with zaptel 1.0.0-2) and > i've got the modem connected to an NTL phone line in the UK. Here is my > config's: > > /etc/zaptel.conf: > > fxsls=1 > loadzone=uk > defaultzone=uk > > > /etc/zapata.conf: > > [channels] > context=incoming_pstn > signalling=fxs_ls > usecallerid=yes > echocancel=yes > echocancelwhenbridged=yes > echotraining=yes > rxgain=0.0 > txgain=0.0 > channel => 1 > > > ztcfg -vvv: > > Zaptel Configuration > ====================== > > Channel map: > > Channel 01: FXS Loopstart (Default) (Slaves: 01) > > 1 channels configured. > > > Any advice would be greatly apprciated! > > > Thanks! > > --ian > > _______________________________________________ > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users ---------------End of Original Message----------------- _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
