I personally would suggest dumping FC3 and going with FC2 and using either chan_capi coupled with mISDN and one of the mISDN supported cards or getting a HFC based card and using bristuff. ISDN4Linux is commonly touted as the least preferred option.
I'm in the middle of setting up a test config of FC2, Fritz! pciv2.0, mISDN and chan_capi (Using mISDN in order to utilise DID). I initially tried FC3 but couldn't get the capi to be recognised by asterisk, I suspect udev might have had something to do with it, hence FC2. Craig ----- Original Message ----- From: "Denis Dulcetta" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Monday, January 10, 2005 11:20 PM Subject: [Asterisk-Users] Digi Datafire Micro V ISDN Card Hi to everyone! I am new to this list and i want to greet you all! I am trying to install Asterisk on a Fedora Core 3 Distribution with a Digi Datafire Micro V ISDN Card. I know that I have to use the ISDN4Linux so in modem.conf I set the I4l driver ,the msn and device. Modem.conf [interfaces] context=remote ;driver=aopen ; modem by AOpen driver=i4l ; isdn4linux - an alternative to i4l is to use chan_capi ; ; Default language ; ;language=en type=autodetect ;type=aopen stripmsd=0 dialtype=tone ;dialtype=pulse ;mode=answer ;mode=ring mode=immediate ; ISDN example (using i4l) ; msn=0415040331 device => /dev/ttyI0 I noticed that my card was detected as eth1 by the system and not as ttyI0, How can I create ttyI0 devices? If I start Asterisk the error returned is: == Parsing '/etc/asterisk/modules.conf': Found [chan_modem.so] => (Generic Voice Modem Driver) == Parsing '/etc/asterisk/modem.conf': Found == Loading modem driver chan_modem_i4l.so => (ISDN4Linux Emulated Modem Driver) Jan 10 15:56:51 WARNING[13454]: chan_modem.c:727 mkif: Unable to open '/dev/ttyI0' Jan 10 15:56:51 ERROR[13454]: chan_modem.c:956 load_module: Unable to register channel '/dev/ttyI0' == Unregistered channel type 'Modem' Jan 10 15:56:51 WARNING[13454]: loader.c:345 ast_load_resource: chan_modem.so: load_module failed, returning -1 == Unregistered channel type 'Modem' Jan 10 15:56:51 WARNING[13454]: loader.c:391 load_modules: Loading module chan_modem.so failed! Clearly I have to create the ttyI0 device Every suggestion will be appreciated! Thanks to all and sorry for my mistakes! Denis ---------------------------------------------------------------------------- ---- > _______________________________________________ > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
