What do you mean "it also applies to busy signal"? Can you elaborate?
My dial-plan is something similar, I have like BroadVoice/VoipJet/NuFone/LookieLoo and if I set them in order of my preference, I've never had the primary fail so I've never witnessed this 60 second delay. But am interested in what solution you discover. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Adi Linden Sent: Monday, January 10, 2005 3:09 PM To: [email protected] Subject: [Asterisk-Users] Multiple gateways for same dial pattern Hi, How can I setup Asterisk to place calls if the same dial pattern can be routed through several PRI gateways. I have one way that I tried: exten => _9737XXXX,1,Dial(SIP/${EXTEN:[EMAIL PROTECTED]) exten => _9737XXXX,2,Dial(SIP/${EXTEN:[EMAIL PROTECTED]) exten => _9737XXXX,3,Dial(SIP/${EXTEN:[EMAIL PROTECTED]) exten => _9737XXXX,4,Congestion exten => _9737XXXX,102,Busy exten => _9737XXXX,103,Busy exten => _9737XXXX,104,Busy So what happens is that if all channels on 172.17.99.5 are in use calls are routed to 172.17.99.6 and if all channels are in use to 172.17.99.7. One of the problems I am experiencing is that if the gateway goes away, crashes or otherwise becomes unreachable, Asterisk tries to establish a session for almost 60 seconds before continuing with the next gateway. If I add a timeout to the dial command is also applies to busy signal, which is not suitable either. Any suggestions? Thanks, Adi _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
