Hi All,
We are currently running Asterisk 1.0.3-BRISTUFFED on Gentoo Linux with a 2.6 Kernel and this is connected to a Telecom ISDN-BRI connection with an HFC-S card, this works quite well but as you can imagine, 2 lines is not enough for a company with 40 VoIP phones.
We are about to have TelstraClear install an E1-PRI service to our new server room and will need a card to go into our Asterisk machine to allow connection to the PRI. I remember reading that the E100P cards do not work with Telstra E1 connections and that a TE410P would be required.
What I am wondering is, the new TE110P is aparently the same as the TE410P but only a single port, has anyone tested this card on an Australian Telstra PRI/PRA or on a New Zealand one?
If these are confirmed to work then I will be very very happy, otherwise I guess I am going to just have to order one for testing!
Thanks for any information that can be provided.
Regards,
Andrew Thrift
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
