Does anyone know how to monitor * to see if they are receiving timing slips on a span connected to a T100P card? I am seeing b-channel restarts quite often and also getting "No D-channels available" warnings from time to time. Yesterday I had all the b-channels crash during a MeetMe Conference. Not good! This PRI is connected to an Avaya Definity PBX that is onsite and located in the same room as *. * is set to clock off the Definity. I am seeing no problems on the PRI from the Definity side.
zaptel.conf is as follows:
span=1,1,0,esf,b8zs bchan=1-23 dchan=24 defaultzone=us loadzone=us
zapata.conf is as follows:
switchtype=national overlapdial=yes signaling=pri_cpe group=15 channel => 1-23 usecallerid=yes callerid=asreceived musiconhold=default echocancel=yes echocancelwhenbridged=yes echotraining=yes
Just thought I'd run this by you. We've been running connected to our Definity G3si R6 via TN767 <--> TE410P and have had no problems.
Our zapata.conf settings our just a little different, might give you something to try. We had some strange problems when set as you have above.
switchtype = 5ess overlapdial = no signaling = pri_net
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
