> > > > > If nothing else, my efforts are documented for anyone else in the > > > > > same boat. > > > > > It seems that you can debug agi by typing agi debug at the * command > > > line. > > > > > Amazing! Here is the output. I am assuming that since astcc-tone > > didnt > > > > > play, the problem lies there. Thoughts? > > > > > > > > Steve, > > > > > > > > I just remembered... > > > > > > > > The Makefile puts all its sounds into /usr/share/asterisk/sounds but * > > > needs > > > > the sounds in /var/lib/asterisk/sounds. > > > > > > > > > > > > Karl > > > > > > Karl, > > > > > > Thanks alot! Everything is working now but I dont get any > > audio in either > > > direction. If I dial the same external number from the same extension, > > > everything is fine but going through the AGI breaks the audio. > > > > To clarify, I get audio just fine while entering the pin and phone number > > but when the call connects over my IAX provider there is no audio > > in either > > direction. > > Steve, > > I sounds like the problem may be in your "trunks" table definition of the > IAX2 connection. > > Unfortunately, I am only using TDM interfaces so I do not know what the path > field should contain for IAX. > For Zap interfaces, I simply put the group I want to use. I.e. "g2". > > > Karl
My final solution after seeing some other posts about CVS update fixing different issues was to update. It all works perfectly now. Thanks again. Steve _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
