Re: [Asterisk-Users] What's the easiest way to get * to call PSTN?

Thu, 13 Jan 2005 06:38:05 -0800

I read the data sheet on the MAX TNT and didn't see anything indicating it supports VoIP/SIP.... have you used it to interface to * using VoIP??
 
-- Mike
 
----- Original Message -----
From: TC
Sent: Wednesday, January 12, 2005 5:01 PM
Subject: Re: [Asterisk-Users] What's the easiest way to get * to call PSTN?

ebayed TNT-Max with SIP for mere 8 pri you might get that for 3K or better
I know i was offered a 4 pri tnt-max for us1500
----- Original Message -----
Sent: Wednesday, January 12, 2005 1:39 PM
Subject: Re: [Asterisk-Users] What's the easiest way to get * to call PSTN?

We are also looking for a high density SIP<->TDM gateway (signalling & media) as an alternative to putting the ISDN PRI cards in the * box. Ideally it should support up to 8 ISDN Pri's with NFAS on the TDM side and 100baseT/1000baseT on the IP side.
 
Has anyone had experience with this type of config?
 
-- Mike
 
----- Original Message -----
From: Walid Azab
Sent: Wednesday, January 12, 2005 12:18 PM
Subject: RE: [Asterisk-Users] What's the easiest way to get * to call PSTN?

We have Asterisk CVS 1.0.2. I intend to connect Asterisk to Cisco 3745 unless there is a better way. Asterisk is not configured with any H/W. Cisco 3745 will accordingly send the call to the softswitch. PGW2200 which controls our AS5300.
 
Walid

From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Damon Estep
Sent: Wednesday, January 12, 2005 3:25 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] What's the easiest way to get * to call PSTN?

You have not specified what type of lines you wish to use, POTS, PRI, T1-CAS, E1, ISDN/BRI ???

 

From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Walid Azab
Sent: Wednesday, January 12, 2005 5:11 AM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: [Asterisk-Users] What's the easiest way to get * to call PSTN?

 

Hi,

 

I just want to know what is the easiest way to have Asterisk route calls to PSTN. Hope any one can help me.

 

PS: Any solution using a Cisco device is preferable.

 

 

Thanks

Walid

_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to