Has anyone also logged a support call with Digium, it has to be either the card, Linux or the Zaptel drivers.
Steve -----Original Message----- From: Joshua McAdam [mailto:[EMAIL PROTECTED] Sent: 14 January 2005 06:30 To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server Has anyone logged a support issue with HP on this one? I still haven't been able to get it working so far, So I'm going to log a support issue here in australia to see what HP can do about this and was wondering if anyone else has. Josh -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Alexander Lopez Sent: Monday, 10 January 2005 4:22 PM To: [EMAIL PROTECTED]; Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server Make sure you has a span defined for each port on the TE410P. With out signaling it would not take interrupts. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Karl H. Putz Sent: Monday, January 10, 2005 12:38 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server I have been having this exact problem with a Tatung dual EMT-64 server as well. I have been trying to get a TE410P running and all looks great, driver loads, runs ztcfg OK, etc. but no interrupts are ever processed. One additional piece of info that I have not seen in this thread is that I am able to successfully start and run a T100P card in this system. In the same PCI slot, wct1xxp driver built from the same CVS HEAD version as the wct4xxp. Just hoping this might shed some light on the problem for any Digium folks monitoring the forum. Karl Putz _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users The information contained in this email is intended for the personal and confidential use of the addressee only. It may also be privileged information. If you are not the intended recipient then you are hereby notified that you have received this document in error and that any review, distribution or copying of this document is strictly prohibited. If you have received this communication in error, please notify Brendata immediately on: +44 (0)1268 466100, or email '[EMAIL PROTECTED]' Brendata (UK) Ltd Nevendon Hall, Nevendon Road, Basildon, Essex. SS13 1BX UK Registered Office as above. Registered in England No. 2764339 See our current vacancies at www.brendata.co.uk _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
