no i was using line 1 for testing /w fxs module and i never changed it back
On Fri, 2005-01-14 at 07:43 -0500, Michael George wrote: > On Mon, Jan 17, 2005 at 08:12:24AM -0600, Justin Carlson wrote: > > hi all, > > > > We have a TDM400 card with 4 wfo modules. now the modules load fine > > and when i start asterisk with on phone line connected it just starts > > spewing these messages: > > -- Starting simple switch on 'Zap/4-1' > > Jan 13 12:59:47 NOTICE[10831]: chan_zap.c:5367 ss_thread: Got event 2 > > (Ring/Answered)... > > Jan 13 12:59:47 NOTICE[10831]: chan_zap.c:5367 ss_thread: Got event 2 > > (Ring/Answered)... > > Jan 13 12:59:49 NOTICE[10831]: chan_zap.c:5367 ss_thread: Got event 2 > > (Ring/Answered)... > > Jan 13 12:59:49 NOTICE[10831]: chan_zap.c:5367 ss_thread: Got event 2 > > (Ring/Answered)... > > Jan 13 12:59:51 NOTICE[10831]: chan_zap.c:5367 ss_thread: Got event 2 > > (Ring/Answered)... > > > > but no one is calling. i have plugged in a analog phone and dialed out > > on this line before i used it for *. any help would be great. > > > > zapata.conf > > [trunkgroups] > > [channels] > > language=en > > context=routing > > group=1 > > immediate=no > > signalling=fxs_ks > > channel => 1-4 > > > > zaptel.conf > > fxsks=2-4 > > loadzone = us > > Is there a reason you have "fxsks=2-4" in zaptel.conf rather than 1-4? > _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
