> Subject: Re: [Asterisk-Users] CAC Channel Bank I - FXS > > On January 15, 2005 03:39 pm, [EMAIL PROTECTED] wrote: > > I have a CAC Channel Bank I with FXS cards. �I've the system up and > > running, with just 1 issue. > > > When I make an inbound call, Asterisk says "Zap/26 is ringing", > > however, the phone never rings. �No lights are lit on the > CAC during the calll. > > None at all, or just no change from idle? �If you pick up the > line that you're ringing (but not hearing it ring), does it > connect your call?
On idle, I have no lights on at all. When the channel rings, no lights are lit. If I pick up the line while it's ringing, yes, it does connect my call. The only time a light is lit, is when I pick up the receiver -- it goes red (in use -- outgoing). > > Outbound call works no problem, and the CAC lights up correctly. > > Any ideas what could be the problem? > > We could be of far more assistance if you posted the relevant > bits from your zapata.conf and your zaptel.conf files... Here is my zaptel.conf: # span 1 = PRI span=1,1,0,esf,b8zs bchan=1-23 dchan=24 # span 2 = Channel Bank 1 span=2,0,0,esf,b8zs fxols=25-48 # span 3 = Spare span=3,0,0,esf,b8zs # span 4 = Spare span=4,0,0,esf,b8zs # unused=49-96 Here is my zapata.conf: ; Channel Bank - port 1 - Sivana/VocTel alarm ; signalling=fxo_ls context=internal callerid=7054979051 channel=>25 ; ; Channel Bank - port 2 - Sivana/VocTel Fax ; signalling=fxo_ls context=internal callerid=7054979051 channel=>26 I'm trying to call channel 26 which is the fax line (with a handset plugged in). -- Richard Cook [EMAIL PROTECTED] Tel: 705-497-9320 ext 2010 _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
