|
Hello,
I cannot make any call with my new quadBRI card
from Junghanns.net in my asterisk box.
My asterisk box is built on Fedora Core 3 linux
system. After compiling drivers from junghanns.net the card driver was loaded
correctly with
- modprobe zaptel
- insmod qozap.ko ( as FC3 is running
a 2.6 linux kernel)
- ztcfg -vvv ( shows 12 channels
correctly configured and the 4 leds on the card were green : ISDN layer 1 was
working)
- the 4 spans are configured in TE
mode
- my ISDN provider is France Telecom
- i didn't make major changes in
the zaptel.conf and zapata.conf files provided with the bri-stuff package
downloaded from Junghanns.net :
zaptel.conf :
loadzone=fr
defaultzone=fr
span=1,1,3,ccs,ami
span=2,0,3,ccs,ami
span=3,0,3,ccs,ami
span=4,0,3,ccs,ami
bchan=1,2
dchan=3
bchan=4,5
dchan=6
bchan=7,8
dchan=9
bchan=10,11
dchan=12
zapata.conf
[channels]
;Default
language
;language=en
switchtype =
euroisdn
; p2mp TE
mode (for connecting ISDN lines in point-to-multipoint
mode)
signalling =
bri_cpe_ptmp
pridialplan
= local
prilocaldialplan = local
echocancel =
yes
context=from-pstn
group =
1
; S/T port
1
channel
=> 1-2
group =
2
; S/T port
2
channel
=> 4-5
group =
3
; S/T port
3
channel
=> 7-8
group =
4
; S/T port
4
channel
=> 10-11
extensions.conf
exten => _0.,1,Dial(Zap/g1/${EXTEN:1})
But when trying to give a call, i'm always
receiving " not able to open Zap channel" from my asterisk box ..
Am i using the right parameters for france telecom
?
Any help would be apreciated !
Thanks.
|
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
