On Mon, 2005-01-17 at 11:11, Jess Coburn wrote: > Hello I have a 800 DID setup to dial into my Asterisk server and I'm > wondering if it's possible to ID when it's a payphone or not? I > suspect it's not since I'm getting calls from someone else's SIP or > IAX box. > > If I had a digium card installed and connected to a couple lines would > I be able to get this information and parse it? > > Thanks, > Jess > _______________________________________________ > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users
At the risk of not being thorough enough and then being corrected! Jess, information indicator digits are made available when using a t-1 with feature group d like setup or on a PRI also setup like a Feature group D. I say like only because in most circumstances here in the US II's are not part of the original setup and you have to request to have them added by the carrier. In PRI, with an ATT switch they are generally made available through the use of Codeset 6 and are pre-pended to the ANI of the calling party. If MF separated by KP ST or DTMF delivery then separated by asterisk sign. Hope this helps! Dave _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
