----- Original Message -----
Sent: Monday, January 17, 2005 6:12
PM
Subject: [Asterisk-Users] transfers
with zap channel
Ok, I've seen discussion before on doing
transfers (attended and unattended), there seems to be much confusion
over it.
As things sit, I've been trying
(unsuccessfully) to do transfers with a zap channel (analog phone
attached to TDM400). I have no idea what I'm missing. My
current understanding is that I need to have transfer=yes in
zapata.conf, do a flash hook, dial the 2nd number, flash hook again and
we're linked (attended). Then if I hang up the call will be
transfered.
However, when I try to do this things don't
work. Here's what I do:
- connection is made between Zap/3 (analog
phone) and Zap/1 (outside line).
- flash hook to get dialtone (I do get
dialtone)
- attempt to transfer to extension 7007 - I
dial 7007
- after dialing the 2nd zero, and before
dialing the 2nd seven, I hear Asterisk announce (seven - zero - one) and
then Zap/3 is hung up (I get a busy signal). Zap/1 gets
parked.
Here's what the log shows:
-- Zap/1-1 answered
Zap/3-1
-- Attempting native bridge of Zap/3-1 and
Zap/1-1
-- Started three way call on channel
1
-- Started music on hold, class 'default', on
Zap/3-1
-- Attempting native bridge of Zap/3-1 and
Zap/1-1
-- Starting simple switch on
'Zap/1-2'
-- Started music on hold, class
'default', on Zap/3-1
== Parked Zap/3-1 on 701. Will timeout
back to dostuff,7001,1 in 45 seconds
-- Added
extension '701' priority 1 to parkedcalls
--
Playing 'digits/7' (language 'en')
-- Hungup
'Zap/1-1'
== Spawn extension (dostuff, 7001, 1) exited
non-zero on 'Parked/Zap/3-1<ZOMBIE>'
--
Stopped music on hold on
Parked/Zap/3-1<ZOMBIE>
-- Playing 'digits/0'
(language 'en')
-- Playing 'digits/1' (language
'en')
-- Parking call to
'Zap/1-2'
-- Hungup
'Zap/1-2'
-- Stopped music on hold on
Zap/3-1
== Zap/3-1 got tired of being
parked
-- Hungup 'Zap/3-1'
I'm not sure what I'm missing.
Apparently something to do with parked calls, so I must be
misunderstanding how do to the call transfer.
I've also tried enabling Asterisk transfer
on the channel (exten =>
7010,1,Dial(${CORDLESS},20,tT)).
My understanding of this method is that
this allows one to hit the pound (#) to start a transfer. Yet
pound does nothing. Is it fair to assume that the tT only works on
SIP channels, or am I missing something else.
Any help is much
appreciated....
Paul
_______________________________________________
Asterisk-Users
mailing
list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To
UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users