Hi, asterisk does not send the RESTART message, the switch sends the message right after the SETUP ACKNOWLEDGE message, note the "<"s in the pri debug output.
regards Klaus Am Freitag, den 21.01.2005, 11:09 +0100 schrieb hanson: > When an outgoing call is dialed a SETUP isdn message is send to the > telco's switch. The teleco's switch > answers with an SETUP ACKNOWLEDGE message. > > In my special case * sends a RESTART message right after SETUP > ACKNOWLEDGE , due to unknown reasons? > This causes the channel to be restarted and the call establishing > canceled ! > ~ -- Called r1/103330037xxxxxxxxx > < Protocol Discriminator: Q.931 (8) len=10 > < Call Ref: len= 2 (reference 32932/0x80A4) (Terminator) > < Message type: SETUP ACKNOWLEDGE (13) > < [18 03 a9 83 88] > < Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, > Exclusive Dchan: 0 > < ChanSel: Reserved > < Ext: 1 Coding: 0 Number Specified Channel > Type: 3 > < Ext: 1 Channel: 8 ] > - -- Processing IE 24 (cs0, Channel Identification) > < Protocol Discriminator: Q.931 (8) len=13 > < Call Ref: len= 2 (reference 0/0x0) (Originator) > < Message type: RESTART (70) > < [18 03 a9 83 88] > < Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, > Exclusive Dchan: 0 > < ChanSel: Reserved > < Ext: 1 Coding: 0 Number Specified Channel > Type: 3 > < Ext: 1 Channel: 8 ] > < [79 01 80] > < Restart Indentifier (len= 3) [ Ext: 1 Spare: 0 Resetting Indicated > Channel (0) ] _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
