This I am sure is a very easy question, but I can't seem to find the answer.
Here is the scenario: cisco 7940g phone has SIP 6.3 firmware applied the file SIP<mac>.cnf does not seem to have a place for it: image_version: P0S3-06-3-00 #line 1 settings line1_name: "5010" ; Line 1 ExtensionUser ID line1_displayname: "5010" ; Line 1 Display Name line1_authname: "5010" ; Line 1 Registration Authentication line1_password: "cisco" ; Line 1 Registration Password line1_shortname: "5010" The SIPDefault.cnf has the proxy addresses is that where it goes? The sip.conf states that this host[phone] is dynamic but either way it must "register" with the * server somehow. It is getting it's tftp files from the * server so I know they are talking. [general] port = 5060 ; Port to bind to (SIP is 5060) bindaddr = 0.0.0.0 ; Address to bind to (all addresses on machine) disallow=all allow=ulaw allow=alaw context = from-sip-external ; Send unknown SIP callers to this context callerid = Unknown [5010] type=friend username=5010 secret=cisco context=from-sip callerid="Eamonn" <5010> qualify=1000 host=dynamic nat=yes canreinvite=no mailbox=5010 Also I have seen many examples online and in Paul Mahler's book for one that show host=dynamic and defaultip=some_ip_address in the same context this seems confusing, to me at least. Thanks Eamonn _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
