I also have a SPA-2000 and it works just fine. However there a many options available in admin mode, mainly on the Line 1/2 tabs and I've no idea what many of then do. Is there a document somewhere that describes them?
The quick start guide that comes with the device only covers the basics and the documentation on the Sipura web site is the same document. Bill Seddon -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Luki Sent: January 22, 2005 8:02 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] SPA-2000 > Any links on how to get a sipura 2000 to connect to > asterisk remotely over the internet ? In my experience, getting the Sipuras (1000, 2000 or 3000) to connect to * over the Internet is a piece of cake -- just make sure you have the NAT related options turned on, if your SPA is behind a NAT. 1) NAT support parameters on the SIP tab 2) NAT Mapping Enable on the Line 1/2 tab (I never needed NAT keep alive) Since you can type in a host name for the server, having a dynamic IP for * is not a problem, just sign up for a free DynDNS service somewhere. The bigger questions are: 1) is your * also behind a NAT? 2) Behind a firewall? 3) Does * accept connection packets from the outside (both SIP and RTP) Getting your * configured so it accepts outside connections is key; one you get your * setup working, configuring a SPA isn't all that bad. --Luki _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
