Nabeel, I would be interested in seeing your schematic for the headset to 2.5 mm adaptor. On a side note ... anyone know if the Polycom headset jack uses the same pinouts???
thanks mike On Tuesday 25 January 2005 07:16 am, Nabeel Jafferali wrote: > Mike Dent wrote: > > Neither, the one I am looking for is the tiny (similar to RJ11) plug. > > Which are used on telephony headsets. > > The RJ10. Well, > http://www.mml.uni-hannover.de/einhorn/headset/index_e.html has the > Cisco 7960 headset jack first. Then, later they have the handset jack, > which I am pretty sure is the same as a "standard" telephone headset > jack. > > You could try both - that's what I did when building my single plug > 2.5mm (cellphone) headset to Cisco 7960 headset "adaptor". > > -- > Nabeel Jafferali > Tel: +1 (416) 628-9342 Toronto > +1 (646) 225-7426 New York > FWD: 46990 > Email/MSN: nabeel<at>jafferali.net > _______________________________________________ > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users -- |- - - - - - - - - - - - - - - - - - - -| |- Mike Dewey of -| |= All Technologies Unlimited, Inc =| |- phone: 303.667.0357 -| |- e-mail: [EMAIL PROTECTED] -| _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
