Matt Hess wrote:
I, personally, think a channel driver handling both sigtran and
mgcp/megaco would be an ideal setup for bridging the gap between ip
and pstn.. especially with the current hardware devices on the market..
but all of that is just opinion..
Kevin P. Fleming wrote:
[EMAIL PROTECTED] wrote:
But I would like asterisk to accept the IMTs.. and the only way to
do that is to find out what DS0 to take and place the calls on based
on the SS7 messages. I guess one of the things I'm not clear on is
going from SS7 to SIP-T, I'm not sure where the state machine exists..
If that's the case, then you external box is just an SS7<->SIP-T
translator, right? It's not involved in the media path at all.
It seems to me that if Asterisk is going to be involved in
setup/teardown of the DS0s, then it needs to be involved in the
signaling as well. Probably the best way to achieve this is going to
be for Asterisk to support SIGTRAN (or one of the other SS7-over-IP
solutions) and use an external SS7-to-SIGTRAN translator (or get
SIGTRAN from your telco(s), if they support it).
Unfortunately I don't think anyone is going to be willing to open source
it. :-/
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
