Gene Naden wrote:
When trying to start asterisk with a four-port FXS/FXO card I get the following error: "Unable to Specify Channel 1 - no such device or address" (Channel 1 should be the first FXO port). I looked in the asterisk-users mailing list archive and found one person who had this problem but did not find an answer. I am using the sample configuration file lines provided by Digium. lsmod says my wcfxo and zaptel modules are loaded Ok, apparently. What could be wrong or where should I look.
Gene Naden, MA , MD
Programmer Analyst
GlobalTeldata II, LLC
4646 N. Ravenswood
Chicago, IL 60640
(773) 878-3161 x 223
Gene,
That usually happens because the kernel modules are not loaded - "No such device". If you are using CVS make sure that wctdm & wcfxo are loaded, while with stable use wcfxs & wcfxo. What is your TDM model number/module configuration?
What does ztcfg -vvv say after doing this?
-- Kristian Kielhofner _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
