Sam> In France, the second most important ADSL provider (named "Free") Sam> offers a phone line (which uses VoIP but can only be used as a FXS) Sam> with unlimited free calls to landlines.
I also have Free ADSL in Paris, and would very much like to get their VoIP working natively with Asterisk. Free assigns each user both a public (for Internet access) and a private (for VoIP and television) IP address, e.g. 81.57.8.9 and 10.0.8.9. For QoS, they use a separate PVC for each address (RFC 1483 routed VC mux). Using a standard (non Freebox) modem, I was able to configure an ATA-186 (with MGCP firmware loaded) to work with the Free service, both incoming and outgoing. However, I could not do this with Asterisk, because it can only act as an MGCP master, so it can't talk to Free's Call Agent, which of course is also a master. Is anyone aware of a software gateway that can act as an MGCP slave (Media Gateway) on one side, and speak IAX, SIP, or H.323 on the other? If this is not available, I would be willing to put some effort into enhancing the * MGCP stack, to also speak the slave side of the protocol. Are there other Free users that would be interested in contributing? --Stewart _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
