----- Original Message ----- From: <[EMAIL PROTECTED]> To: "Asterisk Users Mailing List - Non-Commercial Discussion" <[email protected]> Sent: Tuesday, January 25, 2005 2:44 PM Subject: Re: [Asterisk-Users] Codec mismatch between SIP (BT) and IAX Phone
> > (IAXPhone): > I suppose you're talking about Steve Sokol's phone > If so, then this phone only support gsm. > > > Jan 25 13:52:22 NOTICE[31334]: channel.c:1314 ast_read: Dropping > > incompatible voice frame on IAX2/200/1 of format gsm since our native format > > has changed to ulaw > > > > Why is Asterisk not satisfied with gsm packets - it should transcode if > > necessary ? > > I have enabled gsm and ulaw in both configs, but it seems not sufficient. > Yes, * will transcode, but you specified in the IAX Phone config that > you allow this one tu use gsm AND ulaw, so instead of transcoding, * > just tell the IAX Phone to switch to uLaw, since the originating party > sends it in ulaw. > > Just change your iax.conf to only allow gsm on the IAX Phone like this : > > disallow=all > allow=gsm Oh, I see my mistake. Asterisk checks settings in iax.conf and plays accordingly (I thought it talks to client by himself). Thanks for help, Rob. _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
