> Today I had channel 1 on my TDM400 go to sleep, verified by pluggin in > known good telco lines in various combinations on channel 1 through 4 - > problem is channel 1, not anything external. So after seeing lots of > stuff on the list re: TDM400's I power cycled, removed board and let > linux say nothing's home, replaced board, told linux to ignore it etc. > No OS/asterisk/etc changes made on the box between the it worked stage > and it stopped working stage. > > Any suggestions would be welcome - and it just so happens that a > previously RMA'd TDM board should be here tomorrow - so when that one > arrives I'll swap modules and see if it follows the module or the board...
For those of us that have had probems with the tdm dropping, it seems stopping *, stop and restart zaptel, restart * fixes what seems to be a software bug. No reboot necessary. If that doesn't fix the problem, then you might have a defective module. There was an issue with the first tdm cards shipped (ver e/f) where the first module slot had a problem. Those that received replacement cards found an added jumper wire on them suggesting a printed circuit board trace had been missed (or something like that). _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
