:)
Get an APC power switch, hook it up to a network in the vicinity of your * box and make sure you can reach it from the outside. If the box fails to boot you can remotely power cycle it.
If you need a rocksolid solution have a look at astlinux that can boot * from a compact flash card in read only mode which makes it very hard to break :)
On Wed, 26 Jan 2005, Shoval Tomer wrote:
OK. You're wearing me out.
IF linux boots Asterisk can surely load automatically.
What if linux DOES NOT boot after a power failure?
-----Original Message----- From: Brian Capouch [mailto:[EMAIL PROTECTED] Sent: Tuesday, January 25, 2005 10:52 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] UPS for Asterisk
David Brodbeck wrote:
It comes back up on its own, of course.
If it just works, you have something asterisk without UPS can't give you.
Really? Surely Asterisk can be configured to start itself up when the system boots.
Absolutely.
Where did the notion ever come from that it could not?
B. _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
