Hi,

Enable the driver tracing (see wrapTrace* and libTrace* in oh323.conf),
re-run and send me the output file.

Michael.


Tola Ogunsan wrote:
Hi Michael  and Everyone

I'm trying to connect Asterisk to a CISCO AS5350 using oh323 and I'm getting this error

"reason 24 (Call ended with Q.931 cause)"

I've checked the Asterisk wiki and several other resources. Please can anyone give me a hint on what the problem is I reach my wits end. Thanks

Tola


my config and debug


Configuration of OpenH323 channel driver ------------------------------------------ Version: 0.7.1 Listening on address: 0.0.0.0:1720 Gatekeeper used: No gatekeeper FastStart/H245Tunnelling/H245inSetup: OFF/OFF/OFF Supported formats in pref. order: g729<0> Jitter buffer limits (min/max): 20-500 ms TCP port range: 10000 - 20000 UDP (RAS) port range: 10000 - 20000 UDP (RTP) port range: 10000 - 20000 IP Type-of-Service value: 0 User input mode: 3 Max number of inbound H.323 calls: 10 Max number of outbound H.323 calls: 10 Max number of simultaneous H.323 calls: 10 Max call rate (ingress direction): 1.00/30


Starting simple switch on 'Zap/3-1'
-- Executing Wait("Zap/3-1", "1") in new stack
-- Executing Dial("Zap/3-1", "OH323/[EMAIL PROTECTED]|10") in new stack
-- H.323 call to [EMAIL PROTECTED] with codec(s) g729
Outbound H.323 call 'ip$localhost/263'.
-- Called [EMAIL PROTECTED]
Call 'ip$localhost/263' cleared.
-- H.323 call 'ip$localhost/263' cleared, reason 24 (Call ended with Q.931 cause)
Call 'ip$localhost/263' cleared in INIT state.
-- OH323/L263 is busy
-- Hungup 'OH323/L263'
== Everyone is busy/congested at this time (1:1/0/0)
-- Executing Hangup("Zap/3-1", "") in new stack
== Spawn extension (incoming, s, 3) exited non-zero on 'Zap/3-1'
-- Hungup 'Zap/3-1'
Call 'ip$localhost/263' without owner has already been cleared (2).
-- Starting simple switch on 'Zap/3-1'



_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users

_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to