I am have same issue with PRI and overlap dialling is not enabled.
Stuart
-----Original Message-----
From: "Peter Svensson"<[EMAIL PROTECTED]>
Sent: 01/02/05 16:55:52
To: "Asterisk Users Mailing List - Non-Commercial
Discussion"<[email protected]>
Subject: Re: [Asterisk-Users] Zap channel occasionally misses dialing
thefirst digit
On Tue, 1 Feb 2005, Andrew Kohlsmith wrote:
> I am seeing this too, only I'm using 100% PRI. I'm not sure how it would
be a
> Zap problem since the Zap driver doesn't see any digits when you're
dealing
> with PRI.
>
> Several tries later and it suddenly works.... It's very sporadic.
Do you have overlap dialing enabled on the outgoing interface? There used
to be a bug where the Asterisk zap channel tried to send the overlap
digits before the SETUP ACK was received.
There was a patch applied to cvs, but I am not sure it worked correctly
always. I have not had time to remove our very _very_ ugly workaround to
see if cvs works or not.
Peter
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
[Message truncated. Tap Edit->Mark for Download to get remaining portion.]
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
