On Tue, 01 Feb 2005 16:21:53 -0200, Leonardo Gomes Figueira <[EMAIL PROTECTED]> wrote: > Hi, > > anyone can confirm if the Linksys's ATA and Router (PAP2-NA and > RT31P2-NA) have the same limitation of just one G.729 call like the > Cisco ATA 186 ? > > I'm testing both appliances here and found this issue but could not > confirm this anywhere (nothing on the manual, no document or post from > any user about this). > > In my tests they use G.729 only on the first call and G.711 on the > others. If I disable G.729 on sip.conf for both peers they can't > establish a second call (ring but drop after answer). If there is > allow=ulaw on sip.conf I can establish 1 G.729 call and 3 G.711 with > RT31P2-NA (using three-way calling). > > In PAP2-NA if I mark "Use Pref Codec Only" and there is one call > established, when I call the PAP2 it replies with "488 Not Acceptable Here". >
The Sipura SPA-2000 has that limitation, and the linksys ATA is based on Sipura technology, so it would not surprise me if the PAP2's have the same problem. Aparently, the Sipura SPA-2100 does not have this limitation, when the most recent firmware update is applied to it, however. Brian _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
