Yes, it is enabled. But this not an issue with getting a busy signal.

 

If a caller calls in from the POTS line and dials an extension number that call an IAX client. During the time it is ringing if the caller hangs up, the asterisk box does not detect this and continues through the dial plan priorities. Then, in my case, voicemail answers and I get a recording of a dial tone.

 

Robert

 

 


From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Liaan vd Merwe
Sent: Wednesday, February 02, 2005 11:41 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] * not hanging up when call from POTS to IAX phone

 

Hi

Have you enabled detect busy?

----- Original Message -----

From: Robert Webb

To: Asterisk Users Mailing List - Non-Commercial Discussion

Sent: Wednesday, February 02, 2005 5:01 PM

Subject: [Asterisk-Users] * not hanging up when call from POTS to IAX phone

 

I am having issues that when I call into my * box via a POTS line and dial an extension that is located on an IAX softphone, if the caller hangs up before going to voicemail the dialer continues through the plan and dumps to voicemail. It then records a dialtone.

 

If I call in through the POTS and dial the extension that ties to a FXS port, then everything works as it should. I am new at this and not sure if there may be some setting I am missing.

 

Robert


_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users


Do you Yahoo!?
Yahoo! Mail - You care about security. So do we.
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to