> According to Volume 1 Asterisk Docs > > To create an FXO channel on the same TDM400P card, we list all the > settings for the channel and then define the channel number. Instead of > only having signalling be fxo_ks though we want the signalling to be > fxs_ks. Because the other settings haven't been changed > (signalling=fxs_ks replaces the previous value of signalling), they stay > the same. Which means that while channel 1 takes on the values > language=en,context=default, switchtype=national, and signalling=fxo_ks; > channel takes on the values language=en, context=default, > switchtype=national, and signalling=fxs_ks. > > > You don't need to repeat all of the settings for the second group so it > should read..... > > > zapata.conf : > > context=firstincoming > switchtype=national > signalling=fxs_ks > echotraining=800 > echocancel=128 > echocancelwhenbridged=yes > relaxdtmf=yes > rxgain=0 > txgain=0 > immediate=no > busydetect=no > callprogress-no > musiconhold=default > usecallerid=yes > callerid=asreceived > group=1 > channel => 1-10 > group=2 > channel =>11-12 > > > Can anyone with more experience confirm this is correct? (I'm a total > newb when it comes to configs).
Better check the 'callprogress-no'; it should have an "=" in there. The switchtype=national isn't need with zap fxo channels. That is a PRI parameter that doesn't belong in TDM04b definitions. Otherwise the above appear to be a fine starting point for TDM fxo channels. _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
