Which sip ver are you trying to install. Is it stuck in a loop or anything?
-----Original Message----- From: Nicolas Chabbey [mailto:[EMAIL PROTECTED] Sent: Thursday, February 03, 2005 7:18 AM To: [email protected] Subject: [Asterisk-Users] Cisco 7960G phone crashes during SIP upgrade Hello, I've recently received a Cisco 7960G phone with the factory default SCCP firmware on it. As we're using SIP on our network, the first things i've done was to upgrade but unfortunately the phone just restarted. By looking on the TFTP logs and tcpump output, i've seen that the phone crashed and restarted just after downloading the OS79XX.TXT file, without requesting the image file at any moment. If i'm putting a SCCP image file name (without ext.) on the OS79XX.TXT (begining with P003), the phone doesn't crash and request the respective SEP<mac>.xml file. Unfortunately (again), just after downloading the xml configuration it hang and restart. I've checked the syntax and they's no error on it, if they's one the phone output the error on the display without crashing. Note that i've both put with and without the load information statement, with the same result. Both statical and DHCP configuration has been tried. Maybe it's an hardware failure or i've miss somethings realy important :) Thanks ------------------------------------------------- Nicolas Chabbey <[EMAIL PROTECTED]> Leafnet Networking Research Laboratory http://www.bgp6.info ------------------------------------------------- _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
