Hi All, I am using a Sipura SPA-3000 as an FXO gateway to bring calls in and out of Asterisk. I am using "PSTN Ring Thru Line 1" (on the "PSTN Line" tab) so Asterisk answers the call rather than the SPA-3000. It is all working perfectly except I can't get the SPA-3000 to pass caller ID to Asterisk. It passes "Display Name", "User ID" and any "PSTN CID Number Prefix" I have configured.
I have adjusted "PSTN Ring Thru Delay" to 10 as I realise caller ID is not presented until the second ring in oz. I have also verified that caller ID is enabled on the line (with an analogue LCD handset). Has any aussie out there had success getting the SPA-3000 to pass caller ID to Asterisk? The only settings I havn't played with yet is "Caller ID Method" (on the Regional tab). It is set to the default of "Bellcore (N.Amer, China)" which I beleive is correct. _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
