You should be a salesman!! Ha Ha I have 1 T100P card in the server and I have a spare card already paid for and is sitting in an antistatic bag. If Digium will take it back on a trade then I'm all for it. :)
The final step will be to get the 4 port card and put it in our prod system when we start selling this! You have been a great help and if money was not so tight for testing I would do that tomorrow. Thanks again!!! -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Steven Critchfield Sent: Thursday, February 03, 2005 3:18 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] Question about wildcard T1 card On Thu, 2005-02-03 at 13:54 -0500, Eric Hall wrote: > I have a system up and running now with 1 card. I need to add a second > card for connection from asterisk to my fax server. > > So the best thing to do is just try it and if it does not work order a > 4 port card from Digium. The following is just suggestions. I am not a Digium reseller and I will only benefit from the following suggestions from by helping Digium and by putting some new ideas in others minds. Okay so your option is to choose an additional $500 card or possibly an additional $1500 card. I can say the extra $1000 is no longer small change, but I would still suggest it as a better option for the following set of reasons. 1. With the spare card sitting in an antistatic bag, you could partially recover from catastrophic failure relatively quickly. You are only a small machine install configure away from getting your original single span back up and running. 2. Development/testing environment. With a 4 span card in your primary gateway machine, you can use 1 for your current usage, 1 for your fax server, and a final span to cross connect to your backup system installed with your legacy T100P card. Makes it much less dangerous to test new CVS checkouts when it isn't the primary machine that helps pay the bills. Number 2 also builds on number 1 as it wouldn't be that difficult to put a copy of the deployed code on your primary machine on the testing machine and keep current copies of the dialplan/configs too. That would lower your response time to a failure of any nature. Of course when I started te response, I thought I had a few more ideas to share, but they seem to have escaped me now. > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Steven > Critchfield > Sent: Thursday, February 03, 2005 1:30 PM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [Asterisk-Users] Question about wildcard T1 card > > On Thu, 2005-02-03 at 13:16 -0500, Eric Hall wrote: > > Group > > > > Can I have 2 wildcard T1 cards in the same box? > > > > I was thinking the first card would have channels 1-24 and the > > second card would have 25-48 Does this sound correct? > > You could, but you increase the interupts and might have a system > problem at that point. Also the cost difference from 2 T100Ps is not > too bad to go to a TE4xxP card and you get 2 more spans along with > fewer interupts. -- Steven Critchfield <[EMAIL PROTECTED]> _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
